What is Everbiz's ISO/IEC 17025 laboratory certificate number?
The IECQ certificate number is IECQ-L DQS 26.0004. Its status is Current and it was issued by DQS Taiwan Inc.
EBC obtained UL and CSA certifications in 1994, followed by ISO 9002 certification in 1996. In 2004, we achieved ISO 14001 certification, marking our commitment to environmental responsibility. In 2008, we were awarded TS16949 automotive certification.
In 2016, we further obtained IATF 16949 certification, advancing our pursuit of the high safety and quality standards demanded by the automotive manufacturing industry.
In 2026, we completed greenhouse gas verification in accordance with the GHG Protocol and verified in accordance with ISO 14064-3:2019 to confirm our organizational greenhouse gas statement. We continuously monitor emission data and promote carbon reduction management.
In 2019, EBC became the first IPC-certified wire harness processing factory in all of Asia.
EBC specializes in the R&D and manufacturing of all types of wire assemblies — from computer peripherals to optical surveillance cable assemblies, from power cables to new-energy wire harnesses. Unlike typical wire manufacturers, we maintain a dedicated R&D department to solve design and application challenges, providing customers with the most professional solutions. As technology rapidly evolves, we are committed to integrating intelligent automation with AI to improve production efficiency and quality control.
A technical specification applicable to the design/development, manufacturing, installation, and servicing of automotive-related products. Emphasizes defect prevention, variation reduction, and waste elimination.
Established by ISO, this quality management certification standard verifies that a company can consistently deliver products that meet established quality requirements.
An environmental management standard developed by ISO that helps organizations effectively prevent and control pollution while improving the efficiency of resource and energy utilization.
A wire harness traceability certification issued by Underwriters Laboratories (UL), ensuring all cables used during manufacturing comply with UL certification requirements.
Certified manufacturers hold trainer qualifications for cable and wire harness assembly requirements and acceptance standards, enabling regular in-house training to maintain superior production quality.
A globally recognized production verification standard for the electronic components manufacturing industry, ensuring high-quality soldering processes for component raw materials.
The industry's most widely used acceptability standard for electronic assemblies, defining acceptable quality levels and high-reliability requirements for printed circuit board components.
The product carbon footprint standard, addressing greenhouse gas emissions and removals across the life cycle assessment scope of products and services.
Certificate No.: 2026/118962.1
Certified activity: Manufacturing and assembly of wire harnesses and cables.
Issued by: AFNOR Certification
Valid from: August 6, 2026 Valid until: August 5, 2029
This occupational health and safety management system certification supports a safe and healthy workplace.
Certificate No.: IECQ-L DQS 26.0004
CB Reference No.: 50600581 ITL
Approved scope: The reliability testing of wire harnesses and cables.
Standard: ISO/IEC 17025:2017, General requirements for the competence of testing and calibration laboratories.
Issued by: DQS Taiwan Inc. Status: Current
Initial date: March 5, 2026 Issue date: March 25, 2026
Expiration: March 4, 2029
Schedule No.: IECQ-L DQS 26.0004-S
Revision: 1 Revision date: March 25, 2026
| Test | Standard |
|---|---|
| Cold test | IEC 60068-2-1 |
| Dry heat test | IEC 60068-2-2 |
| Damp heat test, steady state | IEC 60068-2-78 |
| Mating and unmating force test | EIA-364-13 |
Organizational greenhouse gas inventory conducted in accordance with GHG Protocol and verified in accordance with ISO 14064-3:2019. The verification scope covers direct emissions, energy indirect emissions, and other indirect emissions.
View Full Verification ReportThe IECQ certificate number is IECQ-L DQS 26.0004. Its status is Current and it was issued by DQS Taiwan Inc.
The recognition is based on ISO/IEC 17025:2017, General requirements for the competence of testing and calibration laboratories.
The scope covers reliability testing of wire harnesses and cables: cold test to IEC 60068-2-1, dry heat test to IEC 60068-2-2, damp heat test (steady state) to IEC 60068-2-78, and mating and unmating force test to EIA-364-13.
The initial date is March 5, 2026, the issue date is March 25, 2026, and the certificate expires on March 4, 2029.
Fully automated production equipment enhancing throughput and quality consistency
Combining AI and IoT to achieve intelligent management of production processes
ISO/IEC 17025 accredited laboratory ensuring rigorous testing quality